-43%
- Built-in IT mode
- Auto equalize in a month
- Inbuilt PWM Solar Charge Controller
- LED Display for Operation & Fault
- Modified sine wave output
- Maintain battery health for longer life
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
The Shamsi solar inverter feeds the battery installed to it at a constant boost charging current until its voltage reaches 14.58V and the float current, which maintains the voltage above 13.8V.
A sine wave output is also known as waveform for electronic equipment. The incoming AC line is a sine wave, thus electronic equipment expects to see this type of waveform. A sine wave is the most expensive output form for solar manufacturers to produce due to more complex circuitry and components
| Particulars | Description |
| Model | 1475/50A 24V |
| Nominal Grid Voltage | 230V |
| Battery Low Buzzer | 10.8V |
| Battery Low Cut | 10.5V |
| Battery High Cut | 17V |
| SPV Current | 50A |
| Grid – Battery Charging Voltage (Equalize) | After 30 Days |
| Grid – Battery Charging Current | 10A/12.5A |
| Grid Reconnect @ Battery Voltage | 11.8V |
| Output Phase | 1 Phase, 3Wire |
| Nominal Output Voltage | 240V±5% |
| Nominal Frequency | 50Hz±1% |
| Output Waveform | Modified Sinewave |
| Typical Efficiency | ≥88% |
| Protection | Overload, Battery Low, Battery High, Output Short, Battery Reverse, Phase Reverse, Over Heat, SPV High. |
| LED Indication | System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable, Mains Status, Overload, Grid Chg., Inverter ON, Battery Status, SPV Chg., Fault |
| Switches | System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable |
| Type of Charger | PWM |
| Efficiency | >95% |
| Input Voltage Range (Min – Max)Voc | 17V-25V |
| Maximum PV Power Recommended | (315W/320W/325W) x 4 |
| Operating Temperature | 0-50°C |
Based on 0 reviews
Be the first to review “UTL Shamsi 1475 – 24V/50A”
Related products
-
Off Grid Inverter, SHAMSI
Shamsi Solar Inverter 1075-12V
UTL COMBO 1075 (875VA / 12V) UPS COMBO 1075 (875VA/12V) Modified Sine Wave InverterInput Voltage 12 VDC Input Frequency 50Hz +/- 1Hz Low Cut Input Voltage NORMAL LOAD 100V +/- 10V, IT LOAD 170V +/- 10V Low Cut Recovery Input Voltage NORMAL LOAD 110V +/- 10V, IT LOAD 180V +/- 10V SKU: 5487FB8/53
There are no reviews yet.