-22%
HELIAC, Off Grid Inverter
UTL Heliac-1500/50A,12V PWM Pure Sine Wave Solar Inverter with LCD Display
Availability:
27 in stock
₹7,200 ₹9,266
27 in stock
Heliac Solar Inverter 1500 – 50A/12V is a solar hybrid inverter which utilizes both the Solar Power and Grid Power to charge the batteries with giving priority to solar power. Solar power is of the first priority while charging. This means that when Solar power is available, the batteries will be charged with it only, irrespective of whether Grid power is available or not. It is designed to give you the maximum advantages from the Sun and thereby reduces your Electricity costs.
Heliac Solar Inverter 1500 – 50A/12V has the following advance features like PWM solar charge controller, Most advanced Multi Color LCD Display, Maximum preference to solar, Built in IT Mode etc. Demo Video
- Operating Mode Selection:
- PCU Mode Priority – Solar Energy → Battery → Grid
- Smart Mode Priority – Solar Energy → Grid → Battery
- Hybrid Mode – Priority for load → Grid → Solar Energy → Battery
- Priority for battery charging – Solar → Grid
Specification
| Particulars | Description |
| System Rating | 1250/50A |
| Capacity | 1000VA |
| Operating DC Voltage | 12V |
| Nominal Grid Voltage | 230V |
| Battery Low Buzzer | 10.8V |
| Battery Low Cut | 10.5V |
| Battery High Cut | 16.5V |
| Grid Charging Voltage (Equalize) | After 30Days |
| Grid Charging Current | 12A/15A |
| Grid Reconnect @ Battery Voltage | 11.8V |
| Output Phase | 1 Phase |
| Nominal Output Voltage | 220V±8% |
| Max. Output Current | 2.9A |
| Nominal Frequency | 50Hz±1% |
| Output Waveform | Sine wave |
| Typical Efficiency | ≥80% |
| Maximum PV Power Recommended | (150W/160W)x5 |
| Solar current max | 50A |
| Solar current min | >3A (Below 3A, System will act like Solar Absent) |
| Protection | Overload, Battery Low, Battery High, Output Short, Battery Reverse, Over Heat, Over frequency, Under Frequency, SPV High. |
| LED Indication | System ON, (IT Mode, SMF/TUB, Boost Chg., DG Mode, Grid Chg.) Enable/Disable. |
| Switches | Reset for System ON/OFF, UP, Down, Back, Enter(For LCD Calibration) |
| Standard Compliance | IP20 |
| Weight | 11Kg |
| Dimension L x W x H | 300x265x128 mm |
There are no reviews yet.